Radon Mitigation Costs

Radon Levels by ZIP Code

Your ZIP code can tell you your county's radon potential, not your home's radon level. EPA's Map of Radon Zones puts 1,074 U.S. counties in Zone 1, where the predicted average indoor screening level is above 4 pCi/L, 1,034 in Zone 2 (2 to 4 pCi/L) and 1,036 in Zone 3 (below 2 pCi/L), by our count of EPA's file.

Worked lookup

The three Pennsylvania ZIPs show why local data matters. State College's 16801 and York's 17402 had 55.0% and 59.8% of basement tests at or above 4 pCi/L, while South Philadelphia's 19148 had 4.2% (PA DEP data, our count). A county zone alone would not show that spread.

Worked lookup
ZIPCounty (EPA zone)State dataReading
16801 State College, PACentre County (Zone 1)PA DEP: 14,691 basement tests, 55.0% at or above 4 pCi/LHigh potential; test
17402 York, PAYork County (Zone 1)PA DEP: 8,558 basement tests, 59.8% at or above 4 pCi/LHigh potential; test
19148 Philadelphia, PAPhiladelphia County (Zone 2)PA DEP: 7,400 basement tests, 4.2% at or above 4 pCi/LLower share, but still test

Shares are our count of PA DEP's public test-results data set (basement tests, retrieved Oct 16, 2026); zones from EPA's 1993 Map of Radon Zones.

Read this with your result

  • EPA's zone map is from 1993 and county-level, and EPA says it should not be used to determine if individual homes need to be tested. Homes with high radon have been found in all three zones.
  • In EPA's own validation, 72% of county screening averages matched the assigned zone; the rest were one zone off (EPA National Summary).
  • ZIP codes are not counties. In the Census Bureau relationship file, 10,186 of 33,791 ZIP areas cross county lines, and 2,052 include counties in different zones (our count). We show the zone of the county covering most of the ZIP's land, plus the others.
  • State test data comes from voluntary tests. People who suspect radon test more often, and Pennsylvania's data cannot separate post-mitigation retests (the DEP field is not collected).
  • A ZIP or county figure says nothing reliable about one house. Only a test of your home tells you your level (EPA).
  • No medical advice: see EPA and your state radon office.

What the EPA radon zones mean

EPA built the map in 1993 from five inputs: indoor radon measurements, geology, aerial radioactivity, soil permeability and foundation types. It assigned each county the zone of the geologic province covering most of it, to help governments target outreach and radon-resistant building codes. EPA says the map should not be used to determine if individual homes need to be tested, and that homes with elevated radon have been found in all three zones.

Where we have local test results

  • Pennsylvania: ZIP-level results from the Department of Environmental Protection's public test data set. Across 2,644,039 basement tests from July 1985 to July 2026, 37.3% read 4 pCi/L or higher, by our count. We show a ZIP only when it has at least 30 basement tests: 1,452 ZIPs qualify.
  • Ohio: county results from the Ohio Department of Health dashboard. 34.4% of 525,229 tests read 4 pCi/L or higher, test-weighted across 88 counties, by our count.
  • Coming next: Colorado, Minnesota and Iowa county data from their state programs.

How to read your result

Zone 1: your county's predicted average screening level is above 4 pCi/L, EPA's action level. Test soon. In Pennsylvania's Zone 1 counties, the DEP data shows many ZIPs with half or more of basement tests at or above 4 pCi/L.

Zone 2: a predicted average of 2 to 4 pCi/L, the range where EPA says to consider fixing. Plenty of homes in Zone 2 counties test above 4 pCi/L.

Zone 3: below 2 pCi/L predicted. EPA still recommends testing, because elevated homes turn up in every zone.

State data shown: treat the share of tests at or above 4 pCi/L as a rough guide to how common high readings are nearby, not as your number.

What to do with your result

  • Step 1: Test your home, whatever the zone. Short-term kits cost $10 to $30 and professional tests $125 to $400 (HomeGuide, Feb 2026), and many state radon offices offer free or discounted kits.
  • Step 2: If the result is 4 pCi/L or higher, fix it; between 2 and 4 pCi/L, consider fixing (EPA Citizen's Guide, 2016).
  • Step 3: Price a system with the radon mitigation cost calculator. Most sub-slab systems run $1,200 to $2,000 installed (HomeGuide).
  • Step 4: Hire a mitigator holding your state's credential. Pennsylvania requires DEP certification (25 Pa. Code Chapter 240) and Ohio requires an ODH license (OAC 3701-69).
  • Step 5: Retest after installation (EPA Consumer's Guide).

How the lookup is built

ZIP to county: the Census Bureau 2020 ZCTA5-to-county relationship file lists every county a ZIP Code Tabulation Area overlaps, with the land area of each overlap. Each ZIP goes to the county covering most of its land. We keep the other counties too, largest first, so a result can say which other counties the ZIP covers.

County to zone: each county gets its zone from EPA's Map of Radon Zones text version. EPA's map legend describes Zone 1 as highest potential (average indoor radon levels may be greater than 4 pCi/L), Zone 2 as moderate potential (between 2 and 4 pCi/L) and Zone 3 as low potential (less than 2 pCi/L). Where no zone matched a county, the result says so instead of guessing.

Coverage: ZIP areas in the 50 states and the District of Columbia, plus Pennsylvania ZIP codes that appear in DEP's test data but have no Census ZIP area (PO-box ZIPs), which show the DEP figure without a county or zone. A ZIP found in neither file gets a note to try the residential ZIP nearby.

Pennsylvania overlay: basement tests in DEP's data set (its Test Floor Level field records where in the building each test was taken), counted by ZIP, with the share at or above 4 pCi/L. A ZIP shows figures only when it has at least 30 such tests; otherwise the result says there are fewer than 30. DEP's Mitigation System field reads NOT COLLECTED, so retests after mitigation cannot be separated out.

Ohio overlay: the county's number of tests and its percentage of high results from the Ohio Department of Health dashboard, shown for the county, not the ZIP. ODH says its statistics are based on radon levels prior to radon mitigation, with map data from 2010 to present as reported by Ohio licensed radon professionals, and that its dashboard is updated monthly, so the Ohio figures can trail the dashboard until we retrieve it again.

Delivery: the data is split into static files by the first three digits of the ZIP. After you enter a ZIP, your browser downloads that one file and finds your ZIP in it. We rebuild when EPA, the Census Bureau or a state publishes a new file; Pennsylvania data was retrieved October 16, 2026, and runs through July 6, 2026.

Estimates only — independent local providers quote their own pricing. Last reviewed: October 16, 2026.

Frequently Asked Questions

Is my ZIP code safe from radon?

No ZIP is safe by default. EPA reports elevated homes in every zone. Only a test of your home answers it.

Why is my neighbor's level different from mine?

Soil under each slab, foundation cracks, and how the house holds air all vary house to house. That is why EPA tells every home to test.

Where do I get a free test kit?

Ask your state radon office; many offer free or low-cost kits (HomeGuide notes some states provide free short-term kits).

How often is this data updated?

We rebuild when EPA, the Census Bureau or a state publishes a new file. Pennsylvania data was retrieved October 16, 2026, and runs through July 6, 2026.

Rather skip straight to quotes?

Send the short form — we'll route you to an independent local pro.