Block-wall depressurization
Block-wall depressurization pulls radon out of hollow block foundation walls: $1,800–$3,000 installed (HomeGuide, 2026), often paired with sub-slab suction.
- $1,200–$2,000 typical installed system (HomeGuide)
- 4 pCi/L is EPA's action level
- 1 in 15 US homes estimated elevated (EPA)
- Free quotes from certified or licensed mitigators
Fast response from independent local providers. No obligation.
Typical national cost$1,200 – $2,000Cost guide →About Block-wall depressurization
Hollow concrete block foundation walls can carry soil gas up inside the cores. Block-wall suction depressurizes the wall itself and is often paired with sub-slab suction. EPA credits it with a 50 to 99 percent reduction and notes it requires sealing of major openings.
It is the priciest soil-suction method in both data sets: $1,800 to $3,000 in HomeGuide's February 2026 survey and $1,500 to $3,000 in EPA's 2010 table (2010 dollars). EPA lists the yearly running cost at $100 to $400, higher than sub-slab suction.
Common Jobs We Route
- Block-wall depressurization for a hollow block foundation: $1,800–$3,000 (HomeGuide, Feb 2026)
- Block-wall suction added to a sub-slab system, the combination EPA says is common
- Adding block-wall suction when a post-mitigation test still reads high near block walls
- Sealing major openings in the walls, which EPA says the method requires
- Post-mitigation test: $125–$400 professional or $10–$30 for a kit (HomeGuide)
What Affects the Price
Providers quote their own work — these are the factors that consistently move the number.
- Installed range: $1,800–$3,000 (HomeGuide); EPA's 2010 table $1,500–$3,000 (2010 dollars)
- Whether it is combined with sub-slab suction
- Sealing scope for major openings
- Pipe route and extra suction points (interior or attic route est. ×1.15; extra points est. $250–$500 each in our calculator)
- Running cost: $100–$400 a year, higher than sub-slab suction (EPA, 2010 dollars)
How It Works
- Step 1
Identify every foundation type
EPA notes that a house with more than one foundation type may need a combination of techniques.
- Step 2
Compare bids line by line
Check each bid against the published ranges and the radon mitigation cost calculator, which starts from the block-wall range.
- Step 3
Retest after installation
Test within 30 days but no sooner than 24 hours after the fan starts, then at least every two years (EPA).
Cost Guides
Block-wall depressurization FAQs
How much does block-wall depressurization cost?
$1,800 to $3,000 in HomeGuide's February 2026 survey and $1,500 to $3,000 in EPA's 2010 table (2010 dollars).
Do I need both block-wall and sub-slab suction?
Sometimes. EPA notes block-wall suction is often combined with sub-slab suction.
Why does it cost more to run?
EPA's 2010 table lists $100 to $400 a year for block-wall suction against $50 to $200 for sub-slab suction (2010 dollars).
Block-wall depressurization by Area
Need block-wall depressurization?
Send the short form — no obligation.