Radon Mitigation Costs

Radon system repair & fan replacement

Radon fan replacement and system fixes: EPA put a fan replacement at about $200–$350 with parts and labor (2010 dollars). Signs, causes and what to ask for.

  • $1,200–$2,000 typical installed system (HomeGuide)
  • 4 pCi/L is EPA's action level
  • 1 in 15 US homes estimated elevated (EPA)
  • Free quotes from certified or licensed mitigators

Fast response from independent local providers. No obligation.

Typical national cost$1,200 – $2,000Cost guide →

Request Help Now

Two quick steps. We'll route your request to an independent local provider.

Step 2 of 3The details

Where is it, and what's going on?

Radon system repair & fan replacement · Existing system problem — fan or high retest

Free · No obligation · Independent local pros

About Radon system repair & fan replacement

A radon mitigation system only works while its fan runs. EPA's Consumer's Guide says the fan "should NEVER be turned off; it must run continuously for the system to work correctly." EPA says fans may last five years or more, that manufacturer warranties tend not to exceed five years, and that replacing a fan cost around $200 to $350 including parts and labor in its 2010 guide (2010 dollars).

When a post-mitigation test is still at or above 4 pCi/L, the cause is usually the test, the fan, or the design. Design fixes include an added suction point, block-wall suction, a crawlspace membrane or sealing major openings, and many contractors guarantee they will adjust the system to reach a negotiated radon level (EPA).

Common Jobs We Route

  • Radon fan replacement: about $200–$350 with parts and labor (EPA, 2010 dollars)
  • Adding a fan to a passive system: about $300 (EPA 2010 guide)
  • Adding a suction point when one point does not reach the whole footprint (est. $250–$500 each in our calculator)
  • Fixing a disconnected or cracked pipe, a failed seal at the slab, or ice or debris at the exhaust
  • Adding block-wall suction ($1,800–$3,000, HomeGuide) or a crawlspace membrane for a mixed foundation
  • Independent post-repair test: $125–$400 professional or $10–$30 for a kit (HomeGuide)

What Affects the Price

Providers quote their own work — these are the factors that consistently move the number.

  • Whether the fan is still within its warranty, which EPA says tends not to exceed five years
  • Whether the contract guarantees a radon level; if the system missed it, the adjustment should be the installer's cost
  • Fan model and rated airflow: the replacement should match what the system was designed around
  • Scope: a fan or pipe fix versus added suction points or a second method
  • Running cost afterwards: $50–$200 a year for sub-slab systems, $100–$400 for block-wall (EPA, 2010 dollars)

How It Works

  1. Step 1

    Check power and the gauge

    A tripped breaker or ground-fault outlet is the cheapest fix. Even liquid levels in a U-tube gauge mean no suction in the pipe.

  2. Step 2

    Call the installer first

    Bring both test reports, check the fan warranty and ask them to honor any guarantee. If they will not, get a second credentialed mitigator to diagnose it.

  3. Step 3

    Retest

    EPA recommends a test within 30 days but no sooner than 24 hours after the system is back in operation, with windows and doors closed for 12 hours before and during the test.

Radon system repair & fan replacement FAQs

How much does a radon fan replacement cost?

EPA's 2010 guide put it at about $200 to $350 with parts and labor, in 2010 dollars. We have not found a current published survey, so ask for a written quote.

How long does a radon fan last?

EPA says fans may last five years or more, and manufacturer warranties tend not to exceed five years.

Can I turn the fan off in winter?

No. EPA says the fan must run continuously for the system to work.

Need radon system repair & fan replacement?

Send the short form — no obligation.